PCR tires should generally be replaced no later than 10 years after their date of manufacture, even if they have tread remaining and appear undamaged. Some vehicle or tire manufacturers recommend an earlier replacement age, often around six years, so check the guidance for your specific tires and vehicle. Damage or deterioration can make replacement necessary well before either milestone.
Age is not something a tread-depth measurement can reveal. Heat, sunlight, storage conditions, inflation pressure, and driving habits all affect how quickly a tire deteriorates. A lightly driven car can therefore have tires with plenty of tread that still need professional attention.
Look for the tire identification number on the sidewall. On tires manufactured from 2000 onward, its final four digits show the week and year of manufacture. For example, DOT XXXX XXXX 2321 indicates the 23rd week of 2021. The characters before the date vary by tire.
The complete identification number, including the date code, may appear on only one side of the tire. If you cannot find the four-digit date on the outer sidewall, check the inner sidewall or ask a tire shop to locate it. Avoid going under a vehicle that is not properly supported.
Calculate age from the manufacturing date, not from the day you bought the tires or installed them on the car. A tire can spend time in storage before sale. Tires manufactured before 2000 use an older date-code format and should be replaced rather than kept in service.
There is no single age at which every tire suddenly becomes unsafe. The six-year point is a useful time to check the specific replacement guidance for your vehicle and tires, but it is not a universal service life. Some manufacturers call for replacement at that age regardless of appearance; others set a different limit or emphasize periodic inspections.
The ten-year point is a common maximum recommendation from tire manufacturers for passenger-car tires, including spares. It should not be treated as a promise that a tire will remain safe until then. Follow a shorter manufacturer recommendation where one applies, and replace a tire earlier if its condition requires it.
If you are unsure which guidance applies, use the tire’s date code, brand, and model when asking a qualified tire dealer. The vehicle owner’s manual may also contain an age-related recommendation. Check each tire separately: replacements may have been installed at different times.
Rubber can harden and develop cracks as it ages. Check the visible sidewalls and the tread grooves for cracking, especially fine cracks that spread or deepen. Weathering on the outside is a reason for inspection, but an intact-looking sidewall does not prove that the inside of the tire is sound.
Arrange an inspection promptly if you notice:
A bulge can indicate damage to the tire’s internal structure. Do not continue driving on a visibly bulging tire; have it assessed and replaced. Similarly, if a tire is rapidly losing air or the car develops a sudden, severe vibration, stop in a safe place and seek assistance rather than driving on it.
A professional may need to remove the tire from the wheel to assess damage that cannot be seen from outside. Inspection can identify many problems, but it cannot guarantee that a tire will not fail later. That is why an age limit remains relevant even when a tire passes a visual check.
Tires age while a vehicle is parked. Sunlight and heat can accelerate deterioration, and a car that sits for long periods may leave the same part of each tire under load. Underinflation also increases heat and stress when the vehicle is driven. These factors make a low odometer reading an unreliable substitute for checking the date code.
Storage conditions matter too. A tire kept away from direct sunlight, excessive heat, and chemicals is generally better protected than one left outdoors, but proper storage does not stop the clock. When buying tires, checking the date code helps you understand how much of the manufacturer’s recommended age limit has already passed.
Maintain the cold inflation pressure listed on the vehicle’s door-jamb label or in its owner’s manual. Check pressure at least monthly and before a long trip. The maximum pressure molded on the tire sidewall is not necessarily the recommended pressure for your vehicle.
Yes. A spare can age without ever touching the road, and its location in a trunk or under the vehicle can make it easy to overlook. Check its manufacturing date, visible condition, and inflation pressure along with the other tires. Follow the vehicle manufacturer’s instructions for the correct pressure and use of a temporary spare.
If the spare is at or beyond its applicable age limit, replace it even if it looks new. A spare that cannot safely hold pressure is of little use during a roadside emergency.
Start by recording the date code on each tire, including the spare. Compare those dates with the vehicle and tire manufacturers’ recommendations, then arrange an inspection if the tires are approaching a stated limit, show signs of deterioration, or have an uncertain history. Do not wait for an age milestone if there is visible damage or a change in how the car drives.
When replacement is needed, choose tires approved for the vehicle’s specified size, load capacity, and speed rating. Similar-looking tires are not necessarily interchangeable: for example, the HD582 is offered in 22.5-inch sizes such as 295/80R22.5, which are not typical passenger-car sizes. The specifications on your vehicle’s label and in its manual are the appropriate starting point.
Chat Online